AlarmTraq

Nortel Maintenance Object Database

Events  Page 354 of 583      [<<Prev]      [Next >>]

MaintObj Level

Code

OB/ID

Description

Command 1

EN

Suffix

Command 2

EN

Suffix

Command 3

EN

Suffix

Command 4

EN

Suffix

Command 5

EN

Suffix

Command 6

EN

Suffix

PRI218 MAJ ACT n PRI218
Protocol Error: Cause value not supported. Outputdata: DCH: x DATA: y . Where:x = D-channel number and y = Cause information element (IE). Action: Report problem if condition persists. Severity: Critical
PRI219 MAJ ACT n PRI219
Protocol Error: Channel ID octet 3 error. Outputdata: DCH: x DATA: y . Where:x=D-channelnumber and y = Octet 3. Action: Report problem if condition persists. Severity: Critical
PRI220 MAJ ACT n PRI220
Protocol Error: Channel ID octet 5 error. Outputdata: DCH: x DATA: y . Where:x= D-channel number and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI221 MAJ ACT n PRI221
Protocol Error: Channel ID octet 5 error. Incorrect BCH standard. Outputdata:DCH:xDATA: y . Where: x = D-channel number and y = B-channel standard Action: Report problem if condition persists. Severity: Critical
PRI222 MAJ ACT n PRI222
Protocol Error: Channel number does not exist. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = B-channel number. Action: Report problem if condition persists. Severity: Critical
PRI223 MAJ ACT n PRI223
Protocol Error: CREF flag in SETUP message is incorrect. Outputdata:DCH:xDATA:y . Where: x=D-channelnumber and y = Call reference number. Action: Report problem if condition persists. Severity: Critical
PRI224 MIN ACT n PRI224
Protocol Error: State message error, protocol violation. The state IE is not appropriate for the current state. Outputdata: DCH: x DATA: a b c d e . Where x = D-channel number a = Pointer to PRI message call register b = UTN c = StatePM d = Message
PRI225 MAJ ACT n PRI225
Protocol Error: State message error, protocol violation. Release complete received in U11 or U31 state. Outputdata: DCH: x DATA: y . Where:x=D-channelnumber and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI226 MAJ ACT n PRI226
Protocol Error: No RESTart ACK message received. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = UTN. Action: Report problem if condition persists. Severity: Critical
PRI227 MAJ ACT n PRI227
Protocol Error: Message received in NULL state. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI228 MAJ ACT n PRI228
Protocol Error: Mandatory Channel ID missing in ALERTing. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = NONE. Action: Report problem if condition persists. Severity: Critical
PRI229 MAJ ACT n PRI229
Protocol Error: Mandatory Channel ID missing in incoming CONNect message. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = NONE. Action: Report problem if condition persists. Severity: Critical
PRI230 MIN ACT n PRI230
Protocol Error: Incoming NSF contains a mismatch between the route defined by the SID and the call type defined for that route. Outputdata:DCH:xDATA:abc. Where : x = D-channel number a = Facility value b = ISA service type c = Route number Action: Rep
PRI231 MAJ ACT n PRI231
Database Error: NSF error. Invalid service or feature type. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Message type. Action: Coordinate fields with far end switch. Severity: Critical
PRI232 MAJ ACT n PRI232
Protocol Error: PROGRESS INDICATOR not supported. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI233 MAJ ACT n PRI233
Protocol Error: ZERO length for mandatory information element (IE). Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Information element (IE) identifier. Action: Report problem if condition persists. Severity: Critical
PRI234 MAJ ACT n PRI234
Protocol Error: ZERO length for optional information element (IE). Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Information element (IE) identifier. Action: Action: Report problem if condition persists. Severity: Critical
PRI235 MAJ ACT n PRI235
Protocol Error: Bearer capability (BC) - Layer ID is not correct. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Layer ID. Action: Report problem if condition persists. Severity: Critical
PRI236 MAJ ACT n PRI236
Protocol Error: Incorrect Transit Network Selection (TNS) Network ID. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI237 MAJ ACT n PRI237
Protocol Error: Message length exceeds buffer size. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI238 MAJ ACT n PRI238
Protocol Error: Protocol discriminator is not compatible with the message received. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Protocol discriminator. Action: Report problem if condition persists. Severity: Critical
PRI239 MAJ ACT n PRI239
Protocol Error: Maintenance message is not allowed for this DCH interface. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Message type. Action: Report problem if condition persists. Severity: Critical
PRI240 MAJ ACT n PRI240
Protocol Error: No service ack message received. Outputdata:DCH:xDATA:y. Where:x=D-channelnumber and y = UTN. Action: Report problem if condition persists. Severity: Critical
PRI241 MAJ ACT n PRI241
Protocol Error: No response from far end to this PRI call. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = B-channel number. Action: Report problem if condition persists. Severity: Critical
PRI242 MAJ ACT n PRI242
Protocol Error: Received a PRI message with an unsupported service identifier. Outputdata:DCH:xDATA:y . Where:x=D-channelnumber and y = Service identifier. Action: Report problem if condition persists. Severity: Critical